Contact

A cable holder can be installed on various surfaces, including:

1. Walls (concrete, tiles, painted surfaces)
2. Ceilings (concrete, wood, metal structures)
3. Floors (concrete, foundations)
4. Metal structures or frames
5. Fixing elements to wooden or plastic surfaces

The cable holder can hold various cables with a diameter up to 7.5 millimetres, including:

1. Electrical cables
2. Data and computer cables
3. Phone and television cables
4. Lighting cables
5. And other cables

First, use the special adhesive pad that comes with the cable holder for attaching it. The adhesive pad is sticky on both sides, so you need to prepare the cable holder for installation: peel off one side of the pad and stick it to the bottom of the cable holder with the sticky side. Once the pad is attached to the cable holder, it is ready for installation.

Next, at your desired installation site, ensure the surface is clean (free of grease, dust, or other dirt that could reduce the adhesive’s grip). If necessary, wipe the surface with a dry cloth. When the surface is clean and prepared, peel off the protective layer from the second side of the adhesive pad and simply press the holder onto the desired spot. For better adhesion, press the holder against the surface and hold for 2-3 seconds.

That’s all! Your cable holder is installed and ready to use. Repeat these steps for each holder you wish to install. Wishing you successful use and a tidy environment!

You can easily remove the cable holder:
First, do not use any pointed or sharp tools, as you may damage the surface to which the holder is attached.

We recommend using a plastic spatula or another flat plastic tool. A plastic tool will help protect the surface from damage or scratching.

Insert the spatula under the holder and gently lift it; the holder will separate from the adhesive pad. After removing the holder, also remove the adhesive pad or its remnants from the surface.

To remove the adhesive pad, we recommend using a special adhesive cleaner or alcohol. These will remove the pad or its residue without damaging the surface.

A properly and safely removed holder can be reused; simply attach a new adhesive pad to the bottom of the holder and reinstall it in the desired location.